Differential Pressure Transmitter
Differential Pressure Transmitter
LS501L & LS501R level pressure transmitter support HART protocol and can measure differential pressure, liquid level, flow, etc. It is widely used in the petroleum, chemical, electric power, water conservancy, metallurgy, heat, food, medical, environmental control, science lab etc.
Specifications:
| Pressure range: | 0 to 6Kpa…20Mpa |
| Communication: | 2-wired, 4-20mA DC, HART |
| Display | LCD, LED, 0-100% pointer, 4.5 digits display |
| Stability: | 0.1%/year |
| Power supply: | 16-45VDC |
| Protection: | IP65, IP67 |
| Explosion proof | intrinsically safety Ex ia II C T4, ExdIIBT4 |
| Working temperature: | -40 to 70C |
| Range rato | 50:1 |
| Over load | 200%FS |
| Medium | Liquids level in open/closed vessel |
| Load resistance | ≥250ohm |
| Accuracy: | 0.1%FS, 0.2%FS, 0.5%FS |
| Thread connection | M20*1.5. .others as required. |
| Relative humidity: | 0-95%RH |
| Diaphragm material | 316LSS, Hastelloy, Tantalum |
| Flange | Flange size: DN50, DN80, DN100, 2”, 3”, 4”
Flange type: Flush Flange material: carton steel, stainless steel Flange mounting: left size high, right size high, bottom |
| Materials | Isolated Membrane and exhaust/outlet valve: 316 stainless steel;
Flange and connector: steel; O-ring: fluoro rubber; Filled liquid: silicon oil or fluorocarbon oil; Bolt: zinc plating carbon steel:(the material above should be selected at order,if has other requirement,please report in advance) Housing: low copper of bronze; stainless steel Coating: epoxy resin. |
| Electrical connection: | Direct wire, terminal, explosion proof wiring terminal. |
| Weight: | 3.5kg (not including accessories, except with Flange)
Flange: 3-5kg |
LS501L Direct Mounted Flange Level Pressure Transmitter
LS501R Remote Flange Level Pressure Transmitter
Download: